Dress up a plain picture frame with beads, shells, buttons or other decorations using J-B Weld SuperWeld Light Activated Instant Glue. Unlike regular super glue, it doesn't set until you shine the included light on it, so you can position each piece exactly before it cures in seconds.

Difficulty
Easy
Working time
30 min
Cure time
Cures in seconds under the light
Works on
WoodPlasticGlass

How to embellish a picture frame

  1. Step 1: Clean the frame

    Wipe the frame free of dust, dirt and oils so the glue bonds well.

  2. Step 2: Position the decorations

    Apply a small dot of SuperWeld to each decoration and press it onto the frame. Adjust it until it lines up.

  3. Step 3: Cure with the light

    Shine the included light on each piece for a few seconds to cure it, then add your photo and display the frame.

What you'll need

J-B Weld products

Tools and materials

  • plain picture frame
  • decoration items

Frequently asked questions

Do I have to use the included light, and how long does curing take?

The blue light is included and it is what makes this glue different: hold it on the joint and the adhesive cures in seconds. You do not strictly need it, because the glue will cure on its own within 24 hours. Use the light when you want to handle the part right away, and give the joint a few seconds of direct exposure from each accessible side.

What can I do with this that a normal super glue cannot?

You control when it cures. A standard cyanoacrylate begins setting the moment it touches the surface, so you get no time to position parts. With this one you can place the piece, adjust it until it lines up, then trigger the cure with the light. That helps on clear parts, on fiddly assemblies and on joints you need to align precisely.

What is the heat limit once it has cured?

200 degrees F, the same as our other SuperWeld cyanoacrylates. It is not recommended for anything you will smoke through, heat for food, or otherwise put in contact with something you consume, which rules out pipes and vape hardware. For a repair that runs hotter than 200 degrees F, use a high temperature RTV silicone or a J-B Weld epoxy.

Other repairs using SuperWeld Light Activated Instant Glue

  • Home and automotive repairs with SuperWeldVideo by @motortrend

NEED HELP FINDING THE RIGHT PRODUCT FOR YOUR PROJECT

FIND YOUR FIX