HighHeat Syringe - 25 ml
Attributes
Use On
Product Details
HighHeat™ is a two-part epoxy system that provides strong, lasting, heat-resistant repairs up to 550° F. Mixed at a ratio of 1:1, it forms a permanent bond that has a 4730 PSI strength and is chemical and fuel resistant. At room temperature, HighHeat sets in 1 hour and cures to a dark gray color in 24 hours. HighHeat’s cure time is accelerated by heat and can cure in 1 hour at 250°F
Product Attributes
Surfaces
How to Use
Prepare
Clean repair area of dirt, grease, oil, paint, rust, etc.
Mix
After removing the replaceable cap, press down on plunger and squeeze equal amounts onto a disposable surface and mix thoroughly.
Apply
Apply with appropriate tool in an even coat, weld bead or extruded shape as needed.
Dry
Set in 1 hour, and cures in 1 hour with heat, or 24 hours at room temperature.