Refinish a worn wood bar top by filling dents, gouges and holes with J-B Weld KwikWood epoxy putty. Knead it, press it into each flaw and smooth it level. It sets in about an hour, then sand it smooth. For a clear, glossy finish, coat the top with J-B Weld ClearTop Pour-On Epoxy.

Difficulty
Easy
Working time
30 min
Cure time
Sets in 1 hr, then sand
Works on
Wood

How to refinish a bartop

  1. Step 1: Clean the bar top

    Clean the whole surface and remove dirt, grease and debris from every dent and hole.

  2. Step 2: Cut

    Remove required amount of putty.

  3. Step 3: Mix

    Thoroughly knead putty with fingers to a uniform color.

  4. Step 4: Fill dents and holes

    Press KwikWood into each dent, crack and hole until the surface is smooth. To blend the color, knead a little stain into the putty as you mix it.

  5. Step 5: Let it cure, then sand

    Let KwikWood cure for about an hour, then sand the filled spots level with the surrounding wood.

  6. Step 6: Add a clear coat (optional)

    For a crystal-clear, glossy finish, coat the bar top with ClearTop Pour-On Epoxy.

What you'll need

J-B Weld products

Tools and materials

  • cloth
  • Gloves
  • stain

Frequently asked questions

Can KwikWood be stained to match the surrounding wood?

KwikWood is listed as stainable, but it is an epoxy rather than wood and will not absorb stain the way the surrounding grain does. Support's practical answer is that it takes paint but not stain. On stained or finished wood, plan to touch the repair in with paint or a color-matched glaze after it cures rather than trying to stain it.

Can KwikWood be sanded and drilled, and does it shrink?

Yes. KwikWood sets in 15 to 25 minutes and cures in about an hour, after which it can be sanded, drilled, tapped, filed, machined and painted. It cures tan and has a tensile strength of 2450 PSI. It does not expand or shrink as it cures and will not rot or crack. For a hole you intend to redrill, let it cure fully first.

Will it yellow over time, and can I use it outdoors?

J-B Weld does not publish UV stability or non-yellowing data for ClearTop on its own documentation, and the directions describe an indoor project done in a 70 to 80F room. Clear epoxies generally amber under sustained direct sunlight. Keep the piece indoors and out of a sunny window, or put a UV-stable clear topcoat over the cured epoxy.

Other repairs using KwikWood Epoxy Putty

NEED HELP FINDING THE RIGHT PRODUCT FOR YOUR PROJECT

FIND YOUR FIX