Black kitchen sink and faucet in a dark tile backsplash

Repair Crack In A Sink

Learn More About WaterWeld

Repair a crack or chip in a porcelain, ceramic or metal sink with J-B Weld WaterWeld epoxy putty. Dry and sand the area, knead the putty, press it into the crack and smooth it. WaterWeld is waterproof, sets in 15 to 25 minutes and cures off-white in an hour. Sand and paint it to match if needed.

Difficulty
Easy
Working time
20 min
Cure time
Sets in 15-25 min, full cure 1 hr
Works on
PorcelainCeramicMetal

How to repair crack in a sink

  1. Step 1: Clean and dry the crack

    Turn off the faucet, clean the sink and dry the crack completely. Lightly sand off any gloss around it.

  2. Step 2: Cut

    Remove required amount of putty.

  3. Step 3: Mix

    Thoroughly knead putty with fingers to a uniform color.

  4. Step 4: Press it into the crack

    Wearing gloves, press WaterWeld firmly into the crack and smooth it flush. Use extra putty to plug larger holes.

  5. Step 5: Cure and finish

    Let WaterWeld cure for an hour before using the sink. It cures off-white, so sand and paint it to match if you like.

What you'll need

J-B Weld products

Tools and materials

  • chipped/cracked sink
  • Gloves
  • knife

Frequently asked questions

Can WaterWeld be applied to a wet surface or an active leak?

WaterWeld will set and cure underwater, but it bonds best to a dry surface. Shut off the water, dry the area, sand off any gloss, and clean it before you apply. Once the putty is pressed into place it will continue curing even if it is submerged. Wait for a full cure, at least one hour and preferably overnight on plumbing, before you restore pressure.

Can WaterWeld be sanded and painted after it cures?

Yes. Once cured, WaterWeld can be drilled, tapped, filed, sanded and painted, and it cures to an off-white color. Sanding does not affect the seal as long as you do not cut through the patch. If you plan to paint, support recommends letting the repair dry at least three days first, then wiping it clean before you prime or paint.

Which plastics will WaterWeld not bond to?

WaterWeld will not bond to polyethylene (HDPE or LDPE), polypropylene, or polycarbonate, and J-B Weld does not offer an epoxy that will. It does work on PVC, ABS, fiberglass, porcelain, concrete and most metals, provided you sand the gloss off and clean the surface with acetone first. If you are unsure what a plastic is, check the recycling code before you buy.

Other repairs using WaterWeld Epoxy Putty

NEED HELP FINDING THE RIGHT PRODUCT FOR YOUR PROJECT

FIND YOUR FIX