Rear bumper of a white car on a sunny road

Fix a Cracked Bumper

View Plastic Bonder

Most cracked plastic bumpers can be repaired at home with J-B Weld PlasticBonder. Grind and sand both sides of the crack, clamp it flush, then work the mixed adhesive into the crack. It sets in 15 minutes and cures in 30, then you can sand and paint it. Check the plastic first: it won't bond polyethylene or polypropylene.

Difficulty
Moderate
Working time
45 min
Cure time
Sets in 15 min, full cure 30 min
Works on
Plastic

How to fix a cracked bumper

  1. Step 1: Grind the crack

    Smooth both sides of the crack with a rotary tool or a drill fitted with a grinding attachment.

  2. Step 2: Sand and clean

    Roughen the edges of the crack with sandpaper so the adhesive can grip, then clean dirt and dust from inside and outside the crack.

  3. Step 3: Clamp it flush

    If the crack has opened, clamp the bumper so both sides sit flush before you apply the adhesive.

  4. Step 4: Mix

    After removing the replaceable cap, press down on plunger and squeeze equal amounts onto a disposable surface and mix thoroughly.

  5. Step 5: Fill the crack

    Use the included stick to work PlasticBonder deep into the crack, then smooth a layer over it on both sides.

  6. Step 6: Dry

    Sets in 15 minutes. Cures in 30 minutes. If temperature is below 40ºF, then set time is longer.

  7. Step 7: Sand and paint

    Once cured, sand the repair flush and paint it to match. PlasticBonder takes latex or enamel paint.

What you'll need

J-B Weld products

Tools and materials

  • Sandpaper
  • Clamps (if needed)
  • Rotary tool with attachment (if needed)

Frequently asked questions

How can I tell what type of plastic I am trying to repair?

There is no simple home test, but a useful rule of thumb applies: a rigid, hard plastic part is usually ABS and bonds well, while a flexible, waxy-feeling part is usually polypropylene or polyethylene and will not. PlasticBonder Black is intended for hard plastics only. Check for a recycling code or resin stamp molded into the part when you can.

Will PlasticBonder Black bond polyethylene or polypropylene?

Not reliably. It will not adhere to polyethylene, HDPE or LDPE at all, and on polypropylene it can give a cosmetic repair but not a structural one. That covers most poly fuel containers, injection-molded cases and rotomolded parts. Very few adhesives on the market bond these plastics at all, so a plastic welding kit is usually the answer.

Can PlasticBonder Black be painted once cured?

Yes, once fully cured, using latex or enamel paint. Other coatings may not adhere well to the cured urethane. Scuff the cured surface lightly before painting. Because it cures black, many repairs on dark parts need no paint at all. The tan version (50133) is the identical product if you want a lighter base color.

Other repairs using PlasticBonder Black Syringe

NEED HELP FINDING THE RIGHT PRODUCT FOR YOUR PROJECT

FIND YOUR FIX