Black wrought iron patio chairs and table on a stone patio

Seal a Crack in Metal Patio Furniture

Learn more about SteelStik

Fix a crack in a metal patio chair or table with J-B Weld SteelStik, a steel-reinforced epoxy putty. Sand off rust, knead the putty, press it into the crack and shape it. SteelStik sets in 5 minutes and cures in an hour, then you can sand, drill and paint it to match.

Difficulty
Easy
Working time
20 min
Cure time
Sets in 5 min, full cure 1 hr
Works on
MetalSteelCast iron

How to seal a crack in metal patio furniture

  1. Step 1: Clean and sand off rust

    Clean the area and sand off rust and loose paint until you reach clean bare metal around the crack.

  2. Step 2: Cut

    Remove required amount of putty.

  3. Step 3: Mix

    Thoroughly knead putty with fingers to a uniform color.

  4. Step 4: Fill the crack

    Press SteelStik along the crack and into any holes, then smooth it with a damp finger.

  5. Step 5: Cure, then sand and paint

    Let SteelStik cure for an hour. Sand it smooth, wipe it with acetone and paint it to match the furniture.

What you'll need

J-B Weld products

Tools and materials

  • Patio Furniture
  • Gloves
  • Sandpaper

Frequently asked questions

Can SteelStik be drilled, tapped and painted?

Yes. After it cures, SteelStik can be drilled, tapped, machined, ground, filed, sanded and painted, and it cures dark gray. Wipe it with acetone before painting; enamel spray gives a good finish. It will not take chrome plating or powder coating, because it does not conduct current. Where you need clean, reusable machined threads, PlasticBonder (50139) taps better than SteelStik.

Can SteelStik be applied to a damp or wet surface?

No. SteelStik needs a dry surface and must stay dry until it cures. Shut off the water, dry the area, sand it to clean bare metal, and wipe it with acetone before applying. It sets in about 5 minutes and cures in an hour. Once fully cured it can be exposed to water. If the surface cannot be dried, use WaterWeld (8277) instead.

What kind of paint works on SteelStik?

Enamel and latex paints both work well over cured SteelStik. Make sure the repair has reached full cure before you paint.

Other repairs using SteelStik Epoxy Putty

  • Patch rust holes with SteelStikVideo by @bigsbass

NEED HELP FINDING THE RIGHT PRODUCT FOR YOUR PROJECT

FIND YOUR FIX